275 vs. 330 Gallon IBC Tote Mixer Sizing: Working Fill, Shaft and Impeller
By TEKNECMIX
Select an IBC mixer using working fill, mounting height and usable internal geometry. A 275 US gal tote holds approximately 1,041 L at nominal capacity, and a 330 US gal tote approximately 1,249 L. Both model 01 and 02 reference a working volume up to 1,000 L, so confirm actual batch volume independently of the tote label.
Engineering selection table
| Selection item | What to measure | TEKNECMIX reference |
|---|---|---|
| Batch volume | Minimum and maximum working fill | 950 L is within the 1,000 L volume reference; 1,100 L exceeds it |
| Shaft reach | Distance from mounting plane to liquid levels and tote bottom | Model 01: 960 mm; model 02: 900 mm |
| Impeller sizing | Expanded diameter, inside width and obstructions | Model 01: 250 mm; model 02: 400 mm expanded |
| Insertion | Minimum clear bore and entire folded envelope | Model 02’s 15 mm specification is shaft diameter |
| Bridge | Available span and support geometry | Model 02 adjustable bridge: 72–120 cm; confirm actual seating |
Work from your tote drawing
- Mark the mounting plane, centerline, clear opening, internal obstructions and minimum and maximum liquid levels.
- Confirm the impeller position and clearances with the supplier. Check the folded envelope against the insertion path separately.
- Supply liquid viscosity at operating temperature, density, solids, utility and the mixing target. Confirm the fit and duty for the supplied configuration.
Compare the 01 pneumatic model · Compare the 02 electric model · IBC opening and folding-impeller clearance guide.
See the model 01 pneumatic IBC mixer
TEKNECMIX product demo. Use the specific installation drawing and measured clearances for your own tote.
Frequently asked questions
Does a 330 gallon tote automatically need a longer shaft?
Shaft reach depends on the mounting plane, internal depth, impeller position and fill range. Compare the actual drawings before selecting a shaft.
Can I use the expanded impeller diameter as the minimum opening size?
Expanded diameter describes the operating envelope. Ask for the maximum folded insertion envelope of the complete assembly and check the narrowest clear opening.