Pneumatic Closed-Head Drum Mixer — 3/4 HP, 880 mm Shaft
TEKNECMIX offers a 3/4 HP pneumatic closed-head drum mixer with a 600 mm bridge plate, side thumb-screw clamps and dual three-blade folding impellers. The 880 mm shaft and 250 mm expanded impellers form a configuration for drum mixing through a narrow opening, subject to verification of the fully folded assembly and actual bung clearance.
Product features
- 3/4 HP pneumatic air motor with a 195 mm (7.7 in) motor head. Working air pressure: 0.6 MPa (6 bar / 87 psi).
- Stepless speed adjustment: 0–1,600 rpm. Pneumatic drive alone does not establish approval for hazardous or solvent-vapour areas; request configuration-specific documentation.
- 600 mm (23.6 in) horizontal bridge plate with side thumb-screw clamps for closed-head drum mounting. Confirm the drum, support and clear bung opening.
- 304 or 316 stainless steel shaft with dual three-blade folding impellers for narrow-opening insertion. Confirm the fully folded assembly size against the actual bung.
- Shaft length: 880 mm (34.6 in). Expanded impeller diameter: 250 mm (9.8 in). Reference container: 200 L (52.8 US gal); check actual 55 US gal drum dimensions.
- Supplier-stated mixing-mass rating: up to 1,000 kg, subject to application. Actual working mass depends on drum working volume, liquid density and mixing duty. Supplier-stated viscosity: 1–5,000 cP.
Technical specifications
| Specification | Details |
|---|---|
| Drive | 3/4 HP pneumatic air motor |
| Motor head | 195 mm (7.7 in) |
| Working air pressure | 0.6 MPa (6 bar / 87 psi) |
| Adjustable speed | 0–1,600 rpm; stepless air control |
| Container and mounting | Closed-head drum; 600 mm (23.6 in) horizontal bridge plate with side thumb-screw clamps |
| Shaft length | 880 mm (34.6 in) |
| Impeller assembly | Dual three-blade folding impellers; expanded diameter 250 mm (9.8 in) |
| Wetted materials | 304 or 316 stainless steel shaft and impellers; specify the supplied version |
| Supplier-stated mixing-mass rating | Up to 1,000 kg, subject to application; actual working mass depends on drum working volume and liquid density |
| Reference drum volume | 200 L (52.8 US gal); check dimensions of drums marketed as 55 US gal (approximately 208 L) |
| Supplier-stated viscosity range | 1–5,000 cP (numerically equivalent to mPa·s); confirm the liquid and mixing objective |
| Insertion and air-flow checks | Confirm fully folded impeller envelope, clear bung opening, air-flow measurement conditions and motor connection |
| Hazardous-area suitability | Pneumatic drive alone is not proof of certification; request documentation for the exact assembly and installation |
Applications and selection
Discuss paints, inks, coatings, resins and chemical liquids with TEKNECMIX. Provide viscosity at operating temperature, density, solids, working volume and the required mixing result. A stated motor rating, maximum mixing mass or viscosity range does not establish a result for every liquid.
Drum capacity and safety
200 L and 55 US gallons are different capacities: approximately 52.8 US gal and 208 L respectively. The supplier-stated 1,000 kg mixing-mass rating is not a conversion of a 200 L drum volume. Check actual liquid mass, drum working volume, mounting and support for the application. Pneumatic drive does not by itself establish suitability for classified hazardous areas.
For selection and quotation, send the liquid, viscosity at operating temperature, density, working volume, drum drawing or opening dimensions, available utilities, quantity and destination. Request a mixer quote.
Foshan Juxing Intelligent Technology Co., Ltd. · sales@teknecmix.com