TEKNECMIX · PNEUMATIC & ELECTRIC INDUSTRIAL MIXERS
TEKNECMIXINDUSTRIAL MIXINGRequest a quote ↗

Pneumatic IBC Tote Mixer with Folding Impellers

A TEKNECMIX pneumatic IBC tote mixer uses compressed air to drive a stainless steel shaft and folding impellers. Consider this configuration when you have an appropriate compressed-air supply and need to mix liquids in an IBC tote. Confirm both air pressure and flow before choosing the motor.

Listed IBC mixer configuration

Pneumatic IBC mixer specifications
Selection item Details
Drive 1 HP pneumatic motor
Working air pressure 0.6 MPa (6 bar; approximately 87 psi)
Speed adjustment 0–1,300 rpm; forward and reverse rotation
Shaft material and length 304 or 316 stainless steel; 960 mm (37.8 in)
Impellers Two 304 or 316 stainless steel folding impellers; expanded diameter 250 mm (9.8 in)
Container capacity IBC totes up to 1,000 L (approximately 264 US gal); working volume to be confirmed
Mounting IBC bridge support with screw-holder fixture; confirm fit against the actual tote
Air consumption Confirm the motor air-flow requirement and its measurement conditions before sizing the compressed-air supply
Wetted materials 304 or 316 stainless steel shaft and impellers; specify the supplied version
Supplier-stated viscosity range 1–10,000 cP; confirm formulation, temperature, working volume and mixing objective

These details describe the configuration listed on the TEKNECMIX website. Confirm the exact motor, impeller assembly, mounting and accessories in the quotation. Compressed-air consumption and the minimum insertion clearance must be confirmed for the supplied configuration.

Which liquids should I discuss with TEKNECMIX?

The range is offered for application review involving paints, inks, lubricants and adhesives. Provide the actual formulation properties and mixing objective, such as re-suspending settled material or maintaining uniformity. A liquid category does not by itself confirm suitability.

Container capacity alone does not establish mixer suitability. Final selection depends on liquid properties, the mixing objective, impeller geometry, installation and operating conditions.

How does the folding impeller fit the tote?

Check the impeller's fully folded dimensions against the clear opening, then check the expanded impeller against the internal container dimensions. Confirm the shaft working depth, bottom clearance and bridge mounting. The expanded diameter is not the insertion diameter.

What should be confirmed before ordering?

Ask for the motor air-flow requirement at the stated operating conditions, connection details, material compatibility, mounting arrangement and supplied parts. If the installation has a hazardous-area classification, request configuration-specific documentation before selection.

Compare alternatives

Electric IBC tote mixer · Pneumatic versus electric selection guide · Opening and impeller clearance checklist

For a configuration and quotation, send your liquid name, viscosity, density, temperature, working volume, container opening and depth, available utilities, destination country and postal code. Include any solids, process restrictions and required documentation. Discuss your application with TEKNECMIX.

Company: Foshan Juxing Intelligent Technology Co., Ltd. Contact: sales@teknecmix.com.